Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Ultrason® E 6020 P - PESU - BASF

Check here, which other Ultrason E datasheets, application examples or technical articles are available in Material Data Center

机械性能 - 热性能 - 其它性能 - 模塑测量的特殊性能

Any use of this information falls under the rules of our disclaimer.

材料文字说明

聚醚砜薄片， 例如用于薄膜应用和涂料。
根据ISO 1043-1: PESU的缩写名称

机械性能	干 / 已调节	单位	Test Standard
ISO数据
拉伸模量	- / 2650	MPa	ISO 527
屈服应力	- / 85	MPa	ISO 527
屈服伸长率	- / 6.9	%	ISO 527
无缺口简支梁冲击强度, +23°C	- / N	kJ/m²	ISO 179/1eU
简支梁缺口冲击强度, +23°C	- / 7.5	kJ/m²	ISO 179/1eA
ASTM数据
弯曲模量	2599 / -	MPa	ASTM D 790

热性能	干 / 已调节	单位	Test Standard
ISO数据
玻璃化转变温度, 10°C/min	225 / *	°C	ISO 11357-1/-2
热变形温度, 1.80 MPa	207 / *	°C	ISO 75-1/-2
ASTM数据
熔点	225	°C	ASTM D 3418

其它性能	干 / 已调节	单位	Test Standard
吸湿性	1 / *	%	类似ISO 62
密度	1370	kg/m³	ASTM D 792

模塑测量的特殊性能	干 / 已调节	单位	Test Standard
ISO数据
粘数	81 / *	cm³/g	ISO 307, 1157, 1628

典型数据

加工方法

注塑

供货形式

粉料, 自然色

地区供应

北美, 欧洲, 亚太, 中南美洲, 中东/非洲

耐化学性

酸类
	醋酸 (5g/100g) (23°C)
	柠檬酸溶液 (10g/100g) (23°C)
	盐酸 (36g/100g) (23°C)
	硫酸 (38g/100g) (23°C)
	硫酸 (5g/100g) (23°C)
碱类
	氢氧化钠溶液 (35g/100g) (23°C)
	氢氧化钠溶液 (1g/100g) (23°C)
醇类
	异丙醇 (23°C)
	甲醇 (23°C)
	乙醇 (23°C)
碳氢化合物
	甲苯 (23°C)
	异辛烷 (23°C)
酮类
	丙酮 (23°C)
醚类
	(二)乙醚 (23°C)
矿物油
	SAE 10W40号多效润滑油 (23°C)
	SAE 10W40号多效润滑油 (130°C)
	SAE 89/90号变速箱润滑油 (130°C)
盐溶液
	氯化钠溶液(10g/100g) (23°C)
	次氯化钠溶液 (10g/100g) (23°C)
	碳酸钠溶液 (20g/100g) (23°C)
	碳酸钠溶液 (2g/100g) (23°C)
其它
	乙酸乙酯 (23°C)
	DOT4号刹车油 (130°C)
	乙二醇水溶液 (50g/100g) (108°C)
	水 (23°C)
	去离子水 (90°C)
	酚溶液(5g/100g) (23°C)

权利义务的法律声明

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.